|
www.riscos.com Technical Support: |
The names given below omit the initial 'Service_' for clarity:
| Number | Name | Meaning |
|---|---|---|
| &04 | UKCommand | Unknown command |
| &06 | Error | Error has occurred |
| &07 | UKByte | Unknown OS_Byte |
| &08 | UKWord | Unknown OS_Word |
| &09 | Help | *Help has been called |
| &0B | ReleaseFIQ | Release FIQ |
| &0C | ClaimFIQ | Claim FIQ |
| &11 | Memory | Memory controller about to be remapped |
| &12 | StartUpFS | Start up filing system |
| &27 | Reset | Post-Reset |
| &28 | UKConfig | Unknown *Configure |
| &29 | UKStatus | Unknown *Status |
| &2A | NewApplication | Application about to start |
| &40 | FSRedeclare | Start up filing system |
| &41 | For internal use only | |
| &42 | LookupFileType | Look up file type |
| &43 | International | International service |
| &44 | KeyHandler | Keyboard handler |
| &45 | PreReset | Pre-reset |
| &46 | ModeChange | Mode change |
| &47 | ClaimFIQinBackground | Claim FIQ in background |
| &48 | ReAllocatePorts | Econet restarting |
| &49 | StartWimp | Start up any resident module tasks using Wimp_StartTask |
| &4A | StartedWimp | Request to task modules to set taskHandle variable to zero |
| &4B | StartFiler | Request to filing-system-specific desktop filers to start up |
| &4C | StartedFiler | Request to filing-system-specific desktop filers to set taskHandle variable to zero |
| &4D | PreModeChange | Mode change |
| &4E | MemoryMoved | OS_ChangeDynamicArea has just finished |
| &4F | FilerDying | Notification that the Filer module is about to close down |
| &50 | ModeExtension (VDU) ModeExtension (Video) | Allow soft modes |
| &51 | ModeTranslation (VDU) ModeTranslation (Video) | Translate modes for unknown monitor types |
| &52 | MouseTrap | The Wimp has detected a significant mouse movement |
| &53 | WimpCloseDown | Notification that the Window Manager is about to close down a task |
| &54 | Sound | Parts of the Sound system are starting or dying |
| &55 | NetFS | Either a *Logon, a *Bye or a *SDisc/*Mount has occurred |
| &56 | EconetDying | Econet is about to leave |
| &57 | WimpReportError | Request to suspend trapping of VDU output so an error can be displayed |
| &59 | ResourceFSStarted | The file structure inside ResourceFS has changed |
| &5A | ResourceFSDying | ResourceFS is killed |
| &5B | CalibrationChanged | Screen calibration is changed |
| &5C | WimpSaveDesktop | Save some state to a desktop boot file |
| &5D | WimpPalette | Palette change |
| &5E | MessageFileClosed | Message files have been closed |
| &5F | NetFSDying | NetFS is dying |
| &60 | ResourceFSStarting | ResourceFS module is reloaded or reinitialised |
| &64 | TerritoryManagerLoaded | Tell territory modules to register themselves. |
| &65 | PDriverStarting | PDriver sharer module started |
| &66 | PDumperStarting | PDriverDP module starting up |
| &67 | PDumperDying | PDriverDP module dying |
| &68 | CloseFile | Close an object, and any children of that object |
| &69 | IdentifyDisc | Identify disc format |
| &6A | EnumerateFormats | Enumerate available disc formats |
| &6B | IdentifyFormat | Identify disc format name |
| &6C | DisplayFormatHelp | Display list of available formats |
| &6D | ValidateAddress | OS_ValidateAddress has been called with an unrecognised area |
| &6E | FontsChanged | New Font$Path detected |
| &6F | BufferStarting | Notifies modules that the buffer manager is starting |
| &70 | DeviceFSStarting | DeviceFS is starting |
| &71 | DeviceFSDying | DeviceFS is dying |
| &72 | SwitchingOutputToSprite | Output switched to sprite, mask or screen |
| &73 | PostInit | All modules have been initialised |
| &75 | TerritoryStarted | New territory starting |
| &76 | MonitorLeadTranslation (VDU) ModeTranslation (Video) | Translate monitor lead ID |
| &78 | PDriverGetMessages | Get common messages file |
| &79 | DeviceDead | Device has been killed by DeviceFS |
| &7A | ScreenBlanked | Screen blanked by screen blanker |
| &7B | ScreenRestored | Screen restored by screen blanker |
| &7C | DesktopWelcome | Desktop starting |
| &7D | DiscDismounted | Disc dismounted |
| &7E | ShutDown | Switcher shutting down |
| &7F | PDriverChanged | Currently selected printer driver has changed |
| &80 | ShutdownComplete | Shutdown completed |
| &81 | DeviceFSCloseRequest | Opening a device which already has the maximum number of streams open |
| &82 | InvalidateCache | Broadcast whenever the cache is flushed within ColourTrans |
| &83 | ProtocolDying | Part of the AUN Driver Control Interface |
| &84 | FindNetworkDriver | Part of the AUN Driver Control Interface |
| &85 | WimpReportError | Wimp sprite pools have moved |
| &86 | WimpReportError | Allows the Filter Manager to install filters with the Window Manager |
| &87 | FilterManagerInstalled | Filter Manager starting up |
| &88 | FilterManagerDying | Filter Manager dying |
| &89 | ModeChanging | Mode change |
| &8A | Portable | Power down or up |
| &8B | NetworkDriverStatus | Part of the AUN Driver Control Interface |
| &8C | SyntaxError | Syntax error translation |
| &8D | EnumerateScreenModes | Enumerates the available screen modes |
| &8E | PagesUnsafe | Pages specified are about to be swapped for different pages |
| &8F | PagesSafe | Pages specified have been swapped for different pages |
| &90 | DynamicAreaCreate | Dynamic area has just been successfully created |
| &91 | DynamicAreaRemove | Dynamic area is about to be removed |
| &92 | DynamicAreaRenumber | Dynamic area is being renumbered |
| &93 | ColourPickerLoaded | For internal use only |
| &9B | EnumerateNetworkDrivers | Issued to obtain a linked list of all active network device drivers |
| &9D | DCIFrameTypeFree | Issued by a network device driver module once initialised, and when finalising |
| &9E | DCIFrameTypeFree | Part of the AUN Driver Control Interface |
| &9F | DCIProtocolStatus | Issued by a protocol module once it has initialised, and when it is finalising |
| &B0 | InternetStatus | Issued by the Internet module when an interface address has been changed |
| &10800 | ADFSPodule | Issued by ADFS to locate an ST506 expansion card |
| &10801 | ADFSPoduleIDE | Issued by ADFS to locate an IDE expansion card |
| &10802 | ADFSPoduleIDEDying | IDE expansion card dying |
| &400C0 | ErrorStarting | Issued immediately after Wimp_ReportError is called |
| &400C1 | ErrorButtonPressed | Issued when any button on the error report is pressed |
| &400C2 | ErrorEnding | Issued immediately before an error report closes |
| &40200 | NetPrintCheckD1 | Issued by NetPrint to determine if there is a local printer server running |
| &45540 | DrawObjectRender | Issued when the SWI DrawFile_Render encounters an unrecognised object |
| &45541 | DrawObjectDeclareFonts | Issued when the SWI DrawFile_DeclareFonts encounters an unrecognised object |